steel columns for public lighting

cilindrical-conical, seamless drawn
With our two advanced machineries, we are able to produce cilindrical-conical tapered lighting columns without the familiar visible welded seam running from top to bottom. These columns will be drawn from cylindrical tubes. For these columns, we can guarantee the exact diameter (ø48 till ø273 mm), length (maximum 16 meter), wall thickness (3 till 6,3 mm) and conicity can be guaranteed. All conicities are possible. Under the chapter conical tubes and 'special tubes', you can find additional information about different shapes, such as parabola, cigar, ribbed or tubes with decorative elements.

While there are no visible welds, the columns will have a longer life time. The non-interupted structure and the rounding on the total length of the column will take care for a better stability of the column and luminiare.

cilindrical stepped (variable diameters)
A classic column, which has been used for decades, is the cilindrical stepped column. This type of column can be delivered in different variants: post columns, columns with fixed or mountable brackets, foldable column, lighting columns with banners, etc. All types of columns can be supplied with wedges, ground plate or base plate.

The cilindrical stepped columns can be produced out of one piece till a length of 22 meters. If you need lighting columns with a length of minimal 22 meter and it is necessery to hot dip galvanise the column, then we have to split up the column in two sections (due to the length of the zinc bath) We are happy to inform you about the correct solutions.

lighting columns (pictures above and right) steel conical tapered columns, seamless drawn, supplied with a double bracket for public lighting. The bracket is produced from two conical tapered tubes, seamless drawn. Preserving: hot dip galvanised according to EN ISO 1461 and powder coated.
lighting columns - stainless steel cilindrical conical tapered lighting column, seamless drawn, manufactured from stainless steel. The conical tapered tube (seamless drawn) was produced on one of the advanced machineries, and later on cleaned, passivated and brushed.
lighting column steel cilindrical lighting column, provided with four brackets for public lighting. Preserving: hot dip galvanised + powder coating (RAL 9006).
lighting column steel cilindrical-conical tapered lighting column, seamless drawn, provided with two brackets for public lighting. The upper bracket is mountable. The requirement of the client for invisible bolds between the column and the bracket was ful filled. Preserving: hot dip galvanised + powder coating (RAL 9005)
lighting column This type of column was used as a cast iron column. The disadvantage of cast iron is the little elongation of the material. During small collisions, the column will break down. Our client asked us to produce this column identical to the cast iron model, but now from rigid steel. With our advanced machineries, we have the opportunity to change a cilindrical tube to the special shape as specified by our client: conical, seamless drawn, several decorative elements, etc. The assembly hole was supplied with a hinged fixture. All current cast iron columns will be replaced with the steel edition of this type. Preserving: hot dip galvaninsed + painted in a RAL color
lighting columns placed under an angle Complete in line with the background, the architect made the design of these lighting columns. The columns are conical tapered (seamless drawn) and placed under an angle. On the top of the column, different flood lights were mounted for lighting up the required objects. Preserving: hot dip galvanised according to EN ISO 1461 and powder coated.
hinged columns We produced for different railway emplacements belong the Betuweroute - The Netherlands - hinged columns with a length above ground level of 16, 20 or 25 meter. These poles hinges at the top of the base section allowing the luminaire to be serviced at ground level without the need for access equipment such as a cherry picker. On the top of the column, a wheel is mounted for fixing 4, 6 or 8 luminiares. Preserving: hot dip galvanised according to EN ISO 1461.
bended conical tapered lighting columns This lighting column was designed by the city architect and is used in the main street of a new part of the city. De columns are conical tapered (seamless drawn) and bended with three different rays. Preserving: hot dip galvanised according to EN ISO 1461 and powder coated in RAL 9005.
conical tapered lighting columns (seamless drawn) A post column with a length above ground level of 4 meter. Preserving: hot dip galvanised according to EN ISO 1461 and powder coated in RAL 9005.